5 string bass humbucker pickup based on our popular ( The late ) Jimmy Lloyd Rea signature 4 string MM bassbucker. Jimmy is in the Blues Hall of Fame and has played with the likes of BB KIng, Muddy Waters etc so when it comes to a great sounding bass he really knows his thing. This pickup has a resistance of 15.4 kOhm but more importantly puts out a massive 11 Henries of inductance, the true measure of the the power of a pickup.
Unlike a lot of heavily overwound pickups, both bass and guitar, by careful winding and magnet matching the pickup has wonderful low frequency responses without sounding dull and lifeless. If you have a look at the frequency response chart shown you can see how it is very easy to exactly tune the level of bass you are after by using various tone capacitor values so that you get that extreme bass punch right in the chosen frequency ranges.
The chart shows the response of the pickup with both humbucking coils wired in series but as this is a 4 wire output harness pickup you can switch it from series to parallel or coil cut it down to a single coil mode which will enahance its treble responses.
The wiring harness colour codes go like this.
Black = start / negative of coil 1
White = finish / positive of coil 1
Red = start / negative of coil 2
Green = finish / positive of coil 2
The pickup comes pre-wired in series with the red and white wires, that link the two coil banks, ready joined. The pickup is also wax potted and resin sealed.
Physical measurements are as follows.
Overall size, excluding the 3 mount holes is 105mm x 48mm and 20mm overall depth.
Overall string span is 62.5mm across the centres of the non adjustable 10mm diamter pole slugs.