Posted on

What the Dickens !!!!!!

A Rock ‘n’ Roll Christmas Carol
By Someone Who’s Probably Had Too Much Eggnog ( as in Josi Warman )


Ebenezer “Eb” Scrooge was the most self-absorbed lead singer in all of rock ‘n’ roll. A strutting, leather-pants-wearing egomaniac, he demanded the spotlight like a moth demands a flame. His band, The Humbuggers, was once poised for greatness, but Eb’s toxic attitude had left them on the brink of collapse. Late-night arguments, blown gigs, and the inability to recognize anyone else’s talent had turned the once-promising group into a glorified pub act.

None suffered more than Bob Cratchit, the band’s lead guitarist. Bob was a genius with a six-string, coaxing beauty from his beat-up Stratocaster. But despite his talent, he endured Eb’s tantrums and constant putdowns, all for the love of music—and for his family, especially his son Tiny Tim, who dreamed of getting his dad’s band on the charts before the kid’s brittle little legs gave out entirely.

It was Christmas Eve, and the band had just limped through a gig at the Dismal Arms, a venue that smelled like beer, disappointment, and last week’s carpet cleaner. As the crowd booed them off the stage, Eb snapped at Bob.

“You’re dragging me down, Cratchit!” he barked. “You play like a guy who’s afraid to bend a string. Where’s the passion?”

“Passion?!” Bob shot back. “I’ve been carrying this band for years while you prance around screeching like a feral cat!”

“You’re replaceable, Cratchit!” Eb snarled before storming off into the snowy night.


That night, Eb returned to his freezing flat, still convinced he was the only reason The Humbuggers hadn’t yet conquered the charts. As he gulped down a lukewarm whiskey and tuned his acoustic guitar, the lights flickered ominously.

Suddenly, the amp in the corner crackled to life. Out of it came the ghostly image of Marley, Eb’s former bassist and bandmate who’d OD’d after the band’s first album flopped. Marley floated toward him, rattling a chain made of broken guitar straps, tour passes, and unsold merch.

“Eb!” Marley wailed. “You’re on a path to destruction, mate! You’re doomed to a life of irrelevance unless you change your ways!”

“Bah, humbug!” Eb scoffed. “You were always jealous of my talent, Marley. What do you know?”

“Plenty! And tonight, you’ll be visited by three spirits—of bands past, present, and yet to come. Listen to them, or spend eternity gigging in purgatory with no roadies!”

Before Eb could argue, Marley disappeared in a puff of dry ice.


The Ghost of Bands Past

The first ghost showed up at midnight—a bedraggled figure in a faded Led Zeppelin T-shirt. It was Eb’s first-ever drummer, a guy named Sticksy, who’d been fired after complaining about Eb’s insistence on nine-minute vocal solos.

Sticksy whisked Eb back to their first gigs in smoky bars, where the band was fresh, raw, and happy. Eb watched himself laughing with his old mates, sharing greasy chips after shows, and listening to everyone’s input on songs.

“You were part of a team,” Sticksy said. “But your ego ruined it. Remember the night you replaced me with a drum machine?”

“That drum machine was never late to rehearsals,” Eb muttered.

Sticksy rolled his eyes. “You’re hopeless, mate. Maybe the next ghost can fix you.”


The Ghost of Bands Present

At 1 a.m., Eb was jolted awake by a hulking, leather-clad figure holding a Gibson Flying V. The ghost introduced herself as “Rocksy,” the spirit of the present, and took Eb to the Cratchit household.

There, Eb saw Bob huddled by the fire with his family. Despite the cold and the measly meal on the table, they were laughing and singing carols, with Tiny Tim strumming along on a ukulele.

“They believe in you,” Rocksy said. “Bob defends you to everyone, even though you’re impossible to work with. He thinks you still have it in you to be great.”

Eb felt a pang of guilt but quickly buried it. “I’ve been carrying Bob for years! He’s lucky to have me.”

Rocksy sighed. “You’re thicker than a Marshall stack. Let’s move on.”


The Ghost of Bands Yet to Come

At 2 a.m., the final ghost appeared—a silent, cloaked figure with an air of doom. The ghost showed Eb a future where The Humbuggers had disbanded. Bob had joined a rival group and was now shredding his way through sold-out arenas. Tiny Tim, now an adult, dedicated every hit song to his dad.

Meanwhile, Eb saw himself alone, forgotten, and reduced to singing karaoke in a rundown pub. The ghost pointed to a gravestone engraved with the words, “Here lies Ebenezer Scrooge: The Least Missed Frontman of All Time.”

“No!” Eb cried. “I can change! I’ll be better! I’ll give Bob the credit he deserves, and I’ll stop being such a diva!”

The ghost remained silent, but Eb felt his heart swell with resolve.


The next morning, Christmas Day, Eb burst into Bob’s flat, startling the Cratchit family mid-breakfast.

“Bob, I’ve been a total knob!” Eb declared. “You’re the soul of this band, and from now on, you’re getting a bigger share of the royalties—and full credit on all the tracks.”

Bob gawked. “Have you been drinking, or are you actually being sincere?”

“Sincere! Also, Tiny Tim, you’re getting a new guitar!”

Tiny Tim cheered, “God bless us, every one!”

That night, The Humbuggers played their best gig yet, with Eb sharing the spotlight for the first time. The audience went wild, and the band felt like a family again.

And from that day forward, Ebenezer Scrooge became the most generous, supportive frontman in rock ‘n’ roll history—well, at least until the next ego trip.

The End.

Posted on

Treble Bleed Circuit. Why Your Guitar Might Need One

250k volume pot pre-wired with treble bleed circuit

Have you ever rolled down the volume on your electric guitar only to find that the tone turns to mud? That sparkly, jangly high-end that gave your riffs life has suddenly been replaced by a muffled, dull sound. If you’re nodding along, you’re not alone. This is a common woe for guitar players. But fear not — the treble bleed circuit is here to save the day!

Let’s dive into what a treble bleed circuit does. Its advantages and disadvantages, and how you can install one to give your tone a new lease on life.

What Is a Treble Bleed Circuit?

A treble bleed circuit is a simple modification added to the volume control of an electric guitar. It consists of a capacitor and, in some cases, a resistor wired in parallel or series with the capacitor. Its sole mission? To keep the high frequencies of your signal when you roll down the volume knob.

Why does this problem occur in the first place? When you turn down the volume on your guitar, you’re altering the way the signal interacts with the volume pot. This can cause the high frequencies to bleed off, leaving you with a darker, less defined tone. The treble bleed circuit compensates for this loss. It allows more of the high frequencies to pass through even as the volume decreases.

The Advantages of a Treble Bleed Circuit

1. Consistency Across Volume Levels

Without a treble bleed circuit, turning down the volume can feel like turning down the soul of your tone. With a treble bleed installed, you keep clarity and definition no matter where the volume knob is set.

2. Improved Dynamics

Are you a player who loves riding the volume knob to control dynamics ? A treble bleed circuit ensures that your tone stays articulate even at lower volumes. This is especially useful for genres like blues and jazz where subtle shifts in tone make all the difference.

3. Cleaner Signal to Effects

Do you run your guitar through pedals ? Especially overdrive or distortion ? A treble bleed circuit can help keep your sound tight and clear. This is because it prevents the signal from becoming too muddy before it even hits your effects chain.

4. Easy Installation

The treble bleed circuit is one of the simplest mods you can do on a guitar. With just a soldering iron and a few inexpensive components, you can elevate your guitar’s performance.

The Disadvantages of a Treble Bleed Circuit

Of course, no mod is perfect. Here are a few potential downsides to consider:

1. Overly Bright Tone at Low Volumes

Some players find that treble bleed circuits can make their tone too bright when the volume is rolled down. This can happen if the capacitor value isn’t chosen carefully for your particular setup.

2. Loss of “Darkened” Tones

Some players enjoy the darker tones that naturally occur when rolling down the volume. Installing one means saying goodbye to this characteristic.

3. Compatibility Issues

Not all treble bleed circuits work equally well with all pickups and wiring configurations. Humbuckers, single-coils, and active pickups all behave differently, so some experimentation is be required.

4. Slight Learning Curve

Though installation is straightforward, finding the perfect combination of capacitor and resistor values can involve some trial and error. This can be intimidating for beginners.

How to Wire a Treble Bleed Circuit

Warman treble bleed circuit using single capacitor

Ready to dive in and add a treble bleed circuit to your guitar? Here’s how:

What You’ll Need:

  • A capacitor (typically between 680pF and 1500pF)
  • A resistor (100k–300k ohms, depending on your preference)
  • A soldering iron
  • Solder
  • A screwdriver (to access your guitar’s control cavity)

Step 1: Open the Control Cavity

Remove the backplate or pickguard of your guitar to access the volume pot. This is usually a straightforward process, but be sure to keep track of the screws.

Step 2: Identify the Volume Pot Terminals

Locate the terminals on your volume pot. The treble bleed circuit will be soldered across the input and output terminals of the pot. If you’re unsure, check a wiring diagram specific to your guitar model.

Step 3: Prepare the Components

Decide whether you want to use just a capacitor or a capacitor and resistor in combination. Here are two common configurations:

  • Capacitor Only: Solder the capacitor directly between the input and output terminals.
  • Capacitor and Resistor in Parallel: Solder the resistor and capacitor together at both ends. Then solder the pair across the terminals.

Step 4: Solder the Circuit

Using your soldering iron, attach the components to the volume pot. Be careful not to overheat the components or damage the pot.

Step 5: Test the Circuit

Before reassembling your guitar, plug it into an amp and test the volume knob. Check that the treble bleed is working as intended. If the tone feels too bright or not bright enough, try different components.

Step 6: Reassemble Your Guitar

Once you’re satisfied with the results, carefully reassemble your guitar, making sure no wires are pinched or disconnected.

Choosing the Right Components

Finding the perfect capacitor and resistor combination can make all the difference. Here are a few guidelines:

  • For a Bright but Balanced Tone: Start with a 1000pF capacitor and a 150k-ohm resistor in parallel.
  • For a Warmer Tone: Use a smaller capacitor value, such as 680pF, and adjust the resistor accordingly.
  • Experimentation is Key: Try different values to suit your guitar and playing style. The “perfect” treble bleed setup is highly subjective.

To take out some of the guesswork we have some pre-wired treble bleed kits if you click here

To Bleed or Not to Bleed?

So, does your guitar need a treble bleed circuit? That depends on your playing style and tonal preferences. If you find yourself frustrated by a loss of clarity when rolling down the volume, this mod could be a game-changer. However, if you’re attached to the natural tonal shifts of your guitar, you might prefer to leave things as they are.

Ultimately, the treble bleed circuit is a low-cost, high-impact modification that’s worth trying. It might just breathe new life into your guitar’s tone and inspire you to explore new dynamics in your playing.

Happy modding, and may your tone always be top-notch!

This article was written by Josi Warman, founder of Warman Guitars. With over 40 years of experience building guitars, designing pickups, creating custom wiring systems and publishing guitar-building guides, Josi has helped thousands of players upgrade and customise their instruments.