Description
Warman FireBucker chrome Mini Humbucker pickup – brand new neck position, supplied with mounting springs and screws. There is no technical differences between the bridge and neck pickup, other than the lead lengths, so either can be used in any position. You can also use them in 3 pickup set ups. The coils are a 4 wire output for coil tapping etc.
Warman FireBuckers are a twin coil mini humbucker pickup (fits aperture 32.5mm x 70mm approx ) in a chrome poleless metal casing. Beneath the case are two coils wrapped around carbon steel blades with a powerful ceramic magnet. The blades allow the pickup to be used with string spans of up to 54mm. Fully wax potted with the casing grounded to the base plate to eliminate hum and unwanted microphonics.
DC resistance is an average 7 k-ohm , however more importantly, the inductance is 3.5 Henry. That is roughly equivalent to the power of Gibson 490 (3.8H) or DiMarzio HS-3 (3.6H). It’s a perfect pickup for blues and vintage rock sounds.
The frequency response chart, measured on our Pickup Analyzer, shows the response curve of our Firebuckers. The analysis was taken using 2x 500k pots and a 470pF tone capacitor in the circuit. This gives an indication of the voice of the mini humbucker pickup when installed in your guitar.
Four output wire harness to enable a variety of tonal options. If you wire these up with one of our on-on-on 3 position mini toggle switches you can get series, parallel and single coil options from the installtion of one simple switch.
These pickups sound as good as those that cost many times this price. Suitable for all types of music with a rocky heavier side from blues through to full on metal.
Warman® Guitars produces high-value humbucker and single coil pickups designed for guitarists who want powerful tone, reliable electronics, and upgrade-level performance without boutique pickup prices.
