Description
B250k guitar tone potentiometer and A250k volume pot pre-soldered. Full size CTS style.
Having noted on various guitar forums and website pages that people sometime struggle, or are afraid of, soldering the earth connections onto the back of pots we now offer them with this troublesome blob ready sorted.
The B250 tone pot has the main earth connections solder blob ready on the back of the pot. The A250k volume pot has the main earth connection on the casing pre blobbed and the third leg of the pot has been bet back onto the casing and soldered to earth ready.
Now with these pots ready to go all you need do it tin the end of your earth wires and melt them onto the solder blobs with your standard soldering iron. There is little risk of fear of you over heating the pot and causing damage as it’s just going to take you a few seconds of heat to make the joint now.
These A250k B250k guitar potentiometer set have a coarse splined shaft with central split and are used with most common types of push fit control knobs.
Supplied with mounting washers and one half height mounting nut per potentiometer.
DIMENSIONS – approx.
Main body of pot – 24mm diameter
Main body including solder lugs – 30mm
Overall height, inc. shaft – 25mm
Threaded section of shaft – 10mm long
Mount hole diameter – 7mm hole recommended
Please note dimensions are approximate. Photo is generic and physical appearance of pots may differ dependant on production batch and manufacturer changing specs etc.
