Poleless Firebucker – Mini Humbuckers – pair


Poleless Firebucker – Mini Humbuckers – pair


Warman FireBucker Mini Humbucker – brand new supplied with mounting springs and screws and flat black plastic mount rings. Sold as an identical pair, there is no difference between the bridge and neck pickup so either can be used in any position. 4 wire output for coil splitting etc.


Warman FireBuckers are  a twin coil mini humbucker ( 32.5mm x 70mm casing ) in a chrome poleless metal casing. Concealed beneath the case are two coils wrapped around carbon steel blades with a powerful ceramic magnet. The blades allow the pickup to be used with string spans of up to 54mm. Fully wax potted with the casing grounded to the base plate to eliminate hum and unwanted microphonics.



DC resistance is 8.02 k-ohm , however more importantly the inductance is 3.88 Henry so is roughly equivalent to the power of Gibson 490 (3.8H) or DiMarzio HS-3 (3.6H). Its a perfect pickup for blues and vintage rock sounds.

Four output wire harness to enable a variety of tonal options. If you wire these up with one of our on-on-on 3 position mini toggle switches you can get series, parallel and single coil options from the installtion of one simple switch.

These pickups sound as good as those that cost many times this price.  Suitable for all types of music with a rocky heavier side from blues through to full on metal.

Warman pickups use ceramic magnets as these are even brighter than Alnico V or III, and in higher output pickups to help counterbalance the treble lost by the higher resistance (remember higher resistance means more midrange, but less highs).

Weight 0.28 kg
Pickup Type


, ,



Bobbin Type

Pole type

Magnet Type


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Q: Hello, I have a "Poleless Firebucker – Mini Humbuckers – pair" from a year but I lost the paper with the wire colour instructions, could you send me it please? thanks, Dario
— Asked by Dario on 4th April 2016
A: All our 4 wire humbuckers follow pretty much the same wire colour codes as follows. Bare wire - this is overall chassis earth and connects to a common point in the circuit. Black wire - this is the start / negative of Coil 1 White wire - this is the finish / positive of Coil 1 Red wire - this is the start / negative of Coil 2 Green wire - this is the finish / positive of Coil 2
— http://warman-guitars
Q: Are these pickups wax potted and what magnet is used in them or are they ceramic??
— Asked by Andrew on 4th April 2016
A: All our pickups from the lowest to the highest proce ones are either wax or resin potted to avoid unwanted microphonic feed back. We use high quality ceramic magnets in these pickups as they are manufactured to a far more consistent standard than Alnico
— http://warman-guitars
Q: Is an active or passive pick up? Thank you.
— Asked by Cosimo Frisenna on 21st April 2016

This question has not been responded to yet.

Q: How long does it take to ship
— Asked by Tamara on 21st April 2016

This question has not been responded to yet.

Q: Can I mount this on a ephiphone les paul standard?
— Asked by Marco on 27th July 2016

This question has not been responded to yet.

Have a Question? Submit it here!